Lundi - Jeudi 7h30 - 16h30 Vendredi 7h30 - 16h00
Heure de l’Est
905-332-7678 | 1-800-263-4541
Appuyez sur 3 pour Bureau des Commandes
1-5150 Mainway Burlington
Ontario L7L 5Z1
QuickStick™ WB is a NEW groundbreaking water-based duct liner adhesive designed to bond all forms of HVAC insulations (fiberglass, polyester, and elastomeric). The adhesive has a fast tack and a single application goes on smoothly with only one even and consistent pass.
THE NEW QUICK-STICK™ WB ALSO INCLUDES:
*New* 8ft Hose (2ft longer than standard adhesive hoses)
*New* Adjustable spray gun to reduce overspray on varied duct sizes
Stored in long-lasting 22 litre Canisters
The Spec Sheet, Safety Data Sheets, item list, and more information can be found at the product page link below:
VIEW THIS PRODUCT
QuickStick WB has twice the surface area coverage of solvent based duct liner adhesives. A single canister will cover double the surface area of other adhesives meaning you benefit from longer lasting cylinders and fewer replacements.
QuickStick WB has a fast tack and dries within 4-6 minutes to a permanent bond. Only a single application is needed, saving you valuable time and labour when you attach your duct liner. Only one smooth consistent pass is needed for fast, long-lasting results.
Canada is turning to green products with a lower impact on the environment. Solvent-free QuickStick WB is waterbased, nontoxic, and environmentally friendly. It is LEED certified and UL classified with a low VOC and low odour.
Ductmate has a comprehensive range of industry-trusted, high quality adhesives, sealants, gaskets, and more to meet all your project needs. Call DCL Supply today to place your next order:
905-332-7678 | Toll-Free: 1-800-263-4541
(Press 3 for Order Desk).
Available in 22L Canisters with a new Adjustable Spray Gun. Stronger adhesive bond with a longer wet tack. Less air bubbles and reduced sag. Lighter weight with more yield.
VIEW PRODUCT
Gecko Glue™ Gold and Silver are used to bond duct liner insulation to galvanized duct work - Ductmate PolyArmor™ or fiberglass insulation, seal cut edges of fiberglass insulation, bond kraft-backed foil covering to fiberglass, and bond multiple layers of fibrous insulation board.
VIEW PRODUCTS
PROseal®, EVERseal™, EZseal™, and FIBERseal® are Ductmate's premium quality water-based duct sealants for varied industrial, commercial, and residential applications.
VIEW PRODUCTS
To seal metal to metal joints against air leaks in low, medium, and high pressure duct systems.
VIEW PRODUCT
5511M was developed to provide an airtight, watertight, flexible seal for metal-to-metal concealed joints. As a non-skinning, non-drying mastic, 5511M has been specifically formulated for precise application to panel joints at the roll forming line.
VIEW PRODUCT
DCL Supply stock a variety of tapes, sealers, sprays, degalvanizers, and degreasers for all your HVAC needs.
VIEW PRODUCTS
High quality sealing tape for use with Ductmate's 4-bolt connection systems. Also suitable for use with other rectangular flange systems which require gasket
VIEW PRODUCT
Excellent for use between duct flanges to produce an airtight seal.
VIEW PRODUCT
For TDC and TDF connections, where a highly adhesive, low cost gasket is preferred. This product is a high quality general use tape developed for the metal ducting industry for use as a sealant, moisture, and dust barrier. It is non-hardening and has excellent adhesion to most dry metal surfaces.