HVAC Products for the Industrial and Commercial Sector:

All Categories



 

Sticky Tape


To be used for TDC and TDF connections, where a highly adhesive, low cost gasket is preferred.

 


X
X
X
X

 

 

DESCRIPTION

This product is a high quality general use tape developed for the metal ducting industry for use as a sealant, moisture, and dust barrier. It is non-hardening and has excellent adhesion to most dry metal surfaces.

SPECIAL CHARACTERISTICS

 

  • Wide range of application temperatures
  • Works under extreme conditions
  • Non-hardening
  • Superior adhesion to most dry metal surfaces
  • X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    X
    DM25 flange and corners
    DM25 flange and corners
    Rectangular Duct Connections | #: 10150

    The Ductmate 25 self sealing rectangular duct connector systems are used to connect rectangular ducts when a rigid, leak-free connection is required.
    DM35 flange and corners
    DM35 flange and corners
    Rectangular Duct Connections | #: 10100

    The Ductmate 35 self sealing rectangular duct connector systems are used to connect rectangular ducts when a rigid, leak-free connection is required.
    DM45 flange and corners
    DM45 flange and corners
    Rectangular Duct Connections | #: 10200

    The Ductmate 45 self sealing rectangular duct connector systems are used to connect rectangular ducts when a rigid, leak-free connection is required.
    DM35/25 Cleat and Clips
    DM35/25 Cleat and Clips
    Rectangular Duct Connections | #: 10250

    Completes a rectangular duct connection.
    PVC cleat
    PVC cleat
    Rectangular Duct Connections | #: 10300

    A plastic PVC cleat.
    PVC ( Plastic ) Nuts and Bolts
    PVC ( Plastic ) Nuts and Bolts
    Rectangular Duct Connections | #: 10350

    PVC Nuts and Bolts
    Bullnose
    Bullnose
    Rectangular Duct Connections | #: 10400

    Ductmate Press-On Bull Nosing is universal and can be used on DM Flange and T.D.C / T.D.F systems a fast and effective means to reduce fibers within the air stream.
    TDC Cleats and Corners
    TDC Cleats and Corners
    Rectangular Duct Connections | #: 10450

    They can be used in conjunction with a variety of TDC connections along with Ductmate 45.
    TDF Cleats and Corners
    TDF Cleats and Corners
    Rectangular Duct Connections | #: 10500

    They can be used in conjunction with a variety of TDF connections.
    Standing S Cleat, Drive Slips, Hemmed S Cleat
    Standing S Cleat, Drive Slips, Hemmed S Cleat
    Rectangular Duct Connections | #: 10550

    These are the gold standard duct connector in the industry when it comes to rectangular ducts requiring a rigid, leak-proof connection.
    Turning Vane and Rail
    Turning Vane and Rail
    Rectangular Duct Connections | #: 10600

    Acoustical Vane was specifically designed for projects that demand quiet operating systems. This vane provides an easy means for the construction of consistent double wall turning vane systems. Turning vane systems aid in directing air around mitered elbows. The ECONOrail® is a simple means for securing vane for the purpose of directing air around mitered elbows. Other products available in items.
    ProFlex (flex connection)
    ProFlex (flex connection)
    Rectangular Duct Connections | #: 10650

    Designed to isolate equipment noise and vibration from the ductwork, PROflex flexible duct connector consists of a fabric which is secured to sheet metal on both sides. Typically the connector is inserted between the equipment and the ductwork.
    Spiralmate Rings
    Spiralmate Rings
    Round Duct Connections | #: 20100

    The Spiralmate round duct connector was developed to provide a simple method of connecting sections of spiral round ductwork at a lower overall cost.
    Press-On inner rings
    Press-On inner rings
    Round Duct Connections | #: 20150

    New Universal Press-On Inner Rings for Spiralmate and Econoflange Round
    Econoflange
    Econoflange
    Round Duct Connections | #: 20200

    The ECONOflange round duct connector was designed as an alternative to Ductmate's proprietary round self-sealing system, Spiralmate. The user friendly design paired with its excellent performance makes ECONOflange the most cost-effective round flange connection on the market.
    Quicksleeves
    Quicksleeves
    Round Duct Connections | #: 20250

    The single or double bolt Quick-sleeve provides a simple, leak-free connection for round ducts used in air-conditioning, ventilation and dust collection systems.
    Angle Rings
    Angle Rings
    Round Duct Connections | #: 20300

    DCL Supply provide our angle rings from Midwest Metal Products.
    Angle Ring Gaskets
    Angle Ring Gaskets
    Round Duct Connections | #: 20350

    Standard gaskets to match Midwest Metal Products angle rings.
    Spiral Pipe
    Spiral Pipe
    Duct Connections | #: 30100

    DCL Supply stock from 3" to 24" in SMACNA standard gauges. All other materials, sizes and gauges are available on request.
    Spiral Elbows (90 and 45)
    Spiral Elbows (90 and 45)
    Duct Connections | #: 30150

    Innovative and Attractive. Saves time and labour costs.
    Die Stamped Elbows (90 and 45)
    Die Stamped Elbows (90 and 45)
    Duct Connections | #: 30200

    Variety of Die Stamped Elbows in 90° and 45°
    Seamed Elbows (90 and 45)
    Seamed Elbows (90 and 45)
    Duct Connections | #: 30250

    Variety of Seamed Elbows in 90° and 45°
    Adjustable Elbows (90 and 45)
    Adjustable Elbows (90 and 45)
    Duct Connections | #: 30300

    Designed as a way to efficiently turn a straight run of duct. GSI elbows are available in two styles, 45 and 90 degree to accommodate multiple installation needs. Yellow Union Label manufacturing is standard on these products
    Perimeter Pipe (plain)
    Perimeter Pipe (plain)
    Duct Connections | #: 30350

    Available in sizes 16" to 24", our larger sized snap-lock pipe still ships and installs easily, but will require external sealing.
    Perimeter Pipe (GS Plus)
    Perimeter Pipe (GS Plus)
    Duct Connections | #: 30400

    Transverse and Longitudinal seam is pre-sealed with gasket made of EPDM rubber and proprietary co-polymer.
    Damper control hardware
    Damper control hardware
    Duct Connections | #: 30410

    GSI Patented Low Leakage Damper Hardware Components.
    Hi Efficiency Take-offs (HETO's) Straight, Tapered, Centre
    Hi Efficiency Take-offs (HETO's) Straight, Tapered, Centre
    Duct Connections | #: 30450

    Our most versatile duct fitting, combining efficient use of space and optimal airflow when a tapered take-off is required.
    Conicals - various types
    Conicals - various types
    Duct Connections | #: 30500

    Manufactured with an integral one-inch flange and peel and stick gasket, our press-on conical duct fitting installs easily without the need of external sealing.
    Collars
    Collars
    Duct Connections | #: 30550

    Manufactured with an integral one-inch flange and peel and stick gasket, our press-on collar installs easily without the need of external sealing.
    Increaser/Reducer
    Increaser/Reducer
    Duct Connections | #: 30600

    Designed as a way to easily transition from a larger diameter piece of pipe to a smaller diameter.
    Couplings
    Couplings
    Duct Connections | #: 30650

    A simple and easy-to-use connection between two straight duct runs. The 8" also provides the option to add a damper for additional system air balancing.
    In-Line Dampers
    In-Line Dampers
    Duct Connections | #: 30700

    When additional air balancing is required, GSI's in-line sleeve damper has been specifically engineered to work with our GreenSeam Plus pipe.
    Saddle Taps (Gasketed)
    Saddle Taps (Gasketed)
    Duct Connections | #: 30750

    GSI″s factory sealed take-off for round duct. Manufactured with a curved one-inch flange and peel and stick gasket, our saddle tap duct fitting installs easily on round duct without the need of external sealing.
    Tee's
    Tee's
    Duct Connections | #: 30800

    Designed to maximize airflow and factory sealed with our GreenSeam technology, our Free Flow Tee joint is the most effective way to branch a duct run.
    End Caps
    End Caps
    Duct Connections | #: 30850

    Designed as a way to quickly and easily complete a duct run.
    Moisture Drain
    Moisture Drain
    Duct Connections | #: 30860

    When moisture collection is a problem in ductwork or drain pans, the Ductmate Moisture Drain is an economical and fast way of installing a leak-proof drain.
    Stand-Off Kits
    Stand-Off Kits
    Duct Connections | #: 30900

    Stand-Off Hardware and Components
    Proguard Protective Film
    Proguard Protective Film
    Duct Components | #: 40100

    ProGuard is designed to be placed over the opening of the ductwork during storage and transportation to protect the inside of ductwork from dust, dirt and other particles that can lead to poor indoor air quality.
    Full and Half Blastgates
    Full and Half Blastgates
    Duct Components | #: 40150

    Full blast gates (also called cut-offs) are used to open and close branch ducts in a system allowing air to be diverted only to machines that are operating, thus conserving air volume.
    Ball Joints
    Ball Joints
    Duct Components | #: 40200

    Recommended for use with all CNC Machines.
    Duct Mount Registers
    Duct Mount Registers
    Duct Components | #: 40250

    Includes the DMR: Duct-mounted Register
    Diffusers - Round and Square
    Diffusers - Round and Square
    Duct Components | #: 40300

    A variety of square and round diffusers from Nailor Industries.
    Drywall Frames
    Drywall Frames
    Duct Components | #: 40350

    A selection of drywall mounting frames.
    Egg Crate
    Egg Crate
    Duct Components | #: 40400

    Eggcrate Grilles and Registers feature high free area and a clean, crisp architectural look.
    Aluminum Flexible Duct
    Aluminum Flexible Duct
    Duct Components | #: 40450

    Aluminum Flexible Duct from Peppertree Air Solutions Inc.
    MKE and SLD Flex Duct
    MKE and SLD Flex Duct
    Duct Components | #: 40500

    Thermaflex® M-KE and S-LD Flexible Duct
    Bang-It Damper Hardware
    Bang-It Damper Hardware
    Duct Components | #: 40550

    Damper Hardware for Ductmate and GSI's BANGIT Dampers
    Balancing Dampers
    Balancing Dampers
    Duct Components | #: 40600

    Ductmate and GSI's BANGIT Dampers
    Clutcher<span>®</span> and Wire system
    Clutcher® and Wire system
    Reinforcement and Hangers | #: 50100

    Labor saving, versatile means for the suspension of static load HVAC systems indoors.
    Trapeze Hanger
    Trapeze Hanger
    Reinforcement and Hangers | #: 50150

    To suspend rectangular or oval ductwork.
    U Channel
    U Channel
    Reinforcement and Hangers | #: 50200

    U-Channels from Elgin Mills Sheet Metal Manufacturing in Toronto.
    Angle Iron
    Angle Iron
    Reinforcement and Hangers | #: 50250

    Used for reinforcing, stiffeners, brackets, bracing, straps, and hangers.
    Threaded Rod and Damper Rod
    Threaded Rod and Damper Rod
    Reinforcement and Hangers | #: 50300

    Threaded rods and Damper rods.
    EZ Rod and EZ Stud
    EZ Rod and EZ Stud
    Reinforcement and Hangers | #: 50310

    A simple, strong component system to make the installation of tie rods faster. Can be used for both positive and negative pressure.
    Hanger Strap
    Hanger Strap
    Reinforcement and Hangers | #: 50350

    Convenient strapping for hanging.
    Hanging Supports
    Hanging Supports
    Reinforcement and Hangers | #: 50400

    The Isolation Hanger can be used with threaded rods for suspension of ductwork and other equipment in order to isolate vibration to its source.
    Sandwich Door - Flat
    Sandwich Door - Flat
    Access Doors | #: 60100

    Sandwich Access Doors provide easy access into air ducts and units. This door was developed to provide a solid, well-insulated, leak proof door that is simple to install.
    Sandwich Door - Round
    Sandwich Door - Round
    Access Doors | #: 60150

    Sandwich Access Doors provide easy access into air ducts and units. This door was developed to provide a solid, leak proof door that is simple to install.
    Sandwich Door - High Temp ( F1000 - F2000 )
    Sandwich Door - High Temp ( F1000 - F2000 )
    Access Doors | #: 60200

    To provide easy access into high-temperature duct. Access door application approval resides with the authority having jurisdiction.
    Circular Clean Out Door
    Circular Clean Out Door
    Access Doors | #: 60250

    Designed for duct cleaners to provide easy access into air ducts and units. Available in 8″, 10″, and 12″. Hole size is perfect fit to secure metal adapter that holds the vacuum hose.
    Observation / Viewport Doors
    Observation / Viewport Doors
    Access Doors | #: 60300

    This door was designed specifically for hospitals, clean rooms, pharmaceuticals, and laboratories to eliminate danger of dust contaminating ductwork while inspecting in-duct smoke detectors, UVC emitters, fire and smoke dampers, and humidifiers.
    Ultimate Doors - Flat
    Ultimate Doors - Flat
    Access Doors | #: 60350

    To provide easy access into high-temperature air ducts and grease duct systems. This door was designed for applications requiring UL 1978 listing.
    Ultimate Door - Round
    Ultimate Door - Round
    Access Doors | #: 60400

    Ultimate Round Door is specifically designed for use in round grease duct. Manufactured to exact diameter tolerances to insure a tight seal. This door was designed for applications requiring UL 1978 listing.
    Square Frame Doors (Double Cam or Hinged)
    Square Frame Doors (Double Cam or Hinged)
    Access Doors | #: 60450

    Square Framed Access Doors provide easy access into air ducts and units. This door was developed as an inexpensive alternative to the Ductmate Sandwich® Access Door, for low pressure applications.
    Flush Mount Access Door
    Flush Mount Access Door
    Access Doors | #: 60500

    Flush Mount Access Doors.
    Drywall Access Door
    Drywall Access Door
    Access Doors | #: 60550

    Access doors designed for flush installation in drywall or plaster surfaces.
    Access Door Hardware
    Access Door Hardware
    Access Doors | #: 60600

    A large variety of hardware parts for many different models of Access Doors
    Water based sealants
    Water based sealants
    Sealants, Adhesives and Gasket | #: 70100

    PROseal®, EVERseal, EZseal, and FIBERseal® are Ductmate's premium quality water-based duct sealants for varied industrial, commercial, and residential applications.
    Solvent based sealants
    Solvent based sealants
    Sealants, Adhesives and Gasket | #: 70150

    To seal metal to metal joints against air leaks in low, medium, and high pressure duct systems.
    Water based adhesives
    Water based adhesives
    Sealants, Adhesives and Gasket | #: 70200

    Gecko Glue Gold and Silver are used to bond duct liner insulation to galvanized duct work - Ductmate PolyArmor or fiberglass insulation, seal cut edges of fiberglass insulation, bond kraft-backed foil covering to fiberglass, and bond multiple layers of fibrous insulation board.
    Solvent based adhesives
    Solvent based adhesives
    Sealants, Adhesives and Gasket | #: 70250

    To provide a versatile, convenient means for bonding insulation or other materials to smooth, nonporous surfaces.
    QuickStick<sup>™</sup> HS
    QuickStick HS
    Sealants, Adhesives and Gasket | #: 70270

    Coming Soon, Ductmate will be transitioning solvent based products into a better adhesive to better meet your needs. Existing inventory will be available until end of 2020. Call or email DCL Supply for more information.
    QuickStick<sup>™</sup> WB - Water Based
    QuickStick WB - Water Based
    Sealants, Adhesives and Gasket | #: 70280

    QuickStick WB is a water-based and quick tack single application duct liner adhesive designed to bond all forms of HVAC insulations (fiberglass, polyester, and elastomeric). Providing industry leading coverage (2x that of solvent based duct liner adhesives) while maintaining a high level of tack and a long lasting bond.
    Mastics
    Mastics
    Sealants, Adhesives and Gasket | #: 70300

    5511M was developed to provide an airtight, watertight, flexible seal for metal-to-metal concealed joints. As a non-skinning, non-drying mastic, 5511M has been specifically formulated for precise application to panel joints at the roll forming line.
    440 Butyl Gasket tape
    440 Butyl Gasket tape
    Sealants, Adhesives and Gasket | #: 70350

    High quality sealing tape for use with Ductmate's 4-bolt connection systems. Also suitable for use with other rectangular flange systems which require gasket.
    Sticky Tape Gasket (Butyl)
    Sticky Tape Gasket (Butyl)
    Sealants, Adhesives and Gasket | #: 70400

    To be used for TDC and TDF connections, where a highly adhesive, low cost gasket is preferred.
    Gasket (Neoprene)
    Gasket (Neoprene)
    Sealants, Adhesives and Gasket | #: 70450

    Excellent for use between duct flanges to produce an airtight seal.
    Specialty Sealers, Sprays and Paints
    Specialty Sealers, Sprays and Paints
    Sealants, Adhesives and Gasket | #: 70500

    A large variety of tapes, sealers, sprays, and degreasers for your HVAC needs.
    POLYarmor Insulation
    POLYarmor Insulation
    Insulation and Pins | #: 80100

    Ductmate PolyArmor is a polyester duct liner to be used in forced air heating, ventilating, and air conditioning systems. It is engineered to provide industry leading R-values with excellent noise reduction values and superior indoor air quality.
    Insulation - Fiber (Interior or Exterior)
    Insulation - Fiber (Interior or Exterior)
    Insulation and Pins | #: 80150

    For lining and insulating sheet metal ducts in HVAC systems.
    Weld Pins
    Weld Pins
    Insulation and Pins | #: 80200

    Ductmate Weld Pins are used to permanently secure insulation to the inside of sheet metal ductwork. Designed to work with all the standard resistance welding equipment.
    Spotter Pins
    Spotter Pins
    Insulation and Pins | #: 80250

    Gripnail is a proven mechanical fastener used to attach insulation to the inside of sheet metal duct work.
    Stick Pins
    Stick Pins
    Insulation and Pins | #: 80300

    Gripnail's Insulation Hanger easily install any type of insulation up to 3.5" thick to air ducts, metal buildings, concrete foundations - even to the underside of wooden roofs.
    Aluminum Tape / Duct Tape
    Aluminum Tape / Duct Tape
    Insulation and Pins | #: 80350

    Excels in demanding temperature and humidity applications.
    Spiralmate Grips
    Spiralmate Grips
    Install tools and Fasteners | #: 90100

    These customized vise grips work in conjunction with Ductmate's Spiralmate system to quickly align mating duct sections, reducing time manpower and cost.
    Corner Alignment tool
    Corner Alignment tool
    Install tools and Fasteners | #: 90150

    Reduce onsite installation time for rectangular duct.
    TDC/TDF/DM Cleater Tools
    TDC/TDF/DM Cleater Tools
    Install tools and Fasteners | #: 90200

    The Cleater 1 and Cleater 2 are used to attach cleat to Ductmate Flange joints.
    PVC Nuts and Bolts
    PVC Nuts and Bolts
    Install tools and Fasteners | #: 90400

    PVC Nuts and Bolts
    Spray Gun and Hose (Quickstick)
    Spray Gun and Hose (Quickstick)
    Install tools and Fasteners | #: 90450

    To provide a versatile, convenient means for bonding insulation or other materials to smooth, nonporous surfaces.
    Screws and Washers
    Screws and Washers
    Install tools and Fasteners | #: 90550

    Great self-drilling or self-piercing fasteners for virtually any application.
    Drive Bits
    Drive Bits
    Install tools and Fasteners | #: 90560

    MIDWEST® Cleat Driver Tool is a new way for sheet metal workers to install drive cleats more efficiently and with less shoulder strain.
    Paint Brushes
    Paint Brushes
    Install tools and Fasteners | #: 90600

    Plastic handled paint brushes for use with duct sealers.
    Welders for Insulation pins
    Welders for Insulation pins
    Install tools and Fasteners | #: 90650

    The new PowerPinner 7005HS boasts the quickest cycle time and most reliable welds available. Other models available in the items list.
    Left Aviation Snips
    Left Aviation Snips
    Sheet metal hand tools | #: 95100

    Cuts straight and left curves. Easiest used in right hand. Serrated blades.
    Right Aviation Snips
    Right Aviation Snips
    Sheet metal hand tools | #: 95150

    Cuts straight and right curves. Easiest used in left hand. Serrated blades.
    Left or Right Offset Aviation Snips
    Left or Right Offset Aviation Snips
    Sheet metal hand tools | #: 95200

    Offset Left & Right Aviation Snips flow material away from blades and position user's hand above material for best maneuverability cutting full sheets or tight curves.
    12″ Folding Bar
    12″ Folding Bar
    Sheet metal hand tools | #: 95250

    The folding tool is made of tempered steel with double sided throat depth presets. Sight gauges on both sides.
    12″ Straight Tinners
    12″ Straight Tinners
    Sheet metal hand tools | #: 95300

    Each hot drop-forged blade is individually fitted and finish assembled to assure uniform shearing action.
    Estwing Sheet Metal Hammer
    Estwing Sheet Metal Hammer
    Sheet metal hand tools | #: 95350

    Nylon vinyl shock reduction grip with fully polished head and handle forged in one piece. Unsurpassed balance and temper.
    Five Blade Crimpers
    Five Blade Crimpers
    Sheet metal hand tools | #: 95400

    Crimps duct ends up to 1-¼ throat depth.
    16″ Duct Stretcher
    16″ Duct Stretcher
    Sheet metal hand tools | #: 95450

    Used as a lever to pull duct runs together for cleating.
    Scribe
    Scribe
    Sheet metal hand tools | #: 95500

    Scribe sheet metal. With 10 common preset depths (1/8″ ? 1″ )
    Round Fire Dampers
    Round Fire Dampers
    Fire Dampers | #: 97100

    Includes Spring Loaded Fire Dampers
    Sign up for our Free HVAC Newsletter
    BUSINESS HOURS
    Monday - Thursday: 7:30am - 4:30pm
    Friday: 7:30am - 4:00pm

     

    CONTACT US
    DCL Supply: 1-5150 Mainway, Burlington
    Ontario, L7L 5Z1
    Phone: 905-332-7678 (Press 3 for Order Desk)
    Or Toll-Free: 1-800-263-4541
    Email: orders@dclsupply.ca
    SIGN UP FOR OUR MONTHLY NEWSLETTER
    Sign up for our Free HVAC Newsletter
    HVAC Supplies Footer
    Copyright DCL Supply Ltd.© 2024
    -o
    Home
    -o
    All Products
    -o
    Back Page